Skateboard wheels are fastened to the axle by means of a threaded nut. When tightening or loosening skateboard wheel nuts, it is necessary that you use proper tools because if not done properly, it could damage your board’s bearings and components which can render them unusable. If this happens, be prepared to shell out more money for replacement parts.
Tightness is a matter of preference. The more loose your skateboard wheels are, the faster it will roll on smooth surfaces but when you hit cracks or bumps in the road, they can cause your board to bounce around which might be dangerous especially if you’re riding at high speeds. Loose skater wheels may also be more prone to flat spots.
If you want tighter skateboard wheels, use a wrench or socket which fits the nut perfectly and tighten it by hand until it is snug then give another quarter turn using the tool. Remember that over-tightening can damage your bearings so just apply enough force but not too much. You should also check the tightness of your wheels after every few hours of riding.
If you want looser skateboard wheels, use a wrench or socket which fits the nut perfectly and loosen it by hand until it’s snug then give another quarter turn using the tool. Remember that under-tightening can damage your bearings so just apply enough force but not too much. You should also check the tightness of your wheels after every few hours of riding.
Skateboarders who do not own tools can have their local skate shops tighten or loosen their boards’ bearings for a minimal fee. If you want to learn how to do it yourself, remember that safety is always first so be sure that your board is on a stable and level surface before doing anything.
Remember: do not apply too much force when tightening or loosening the skateboard wheels as this could damage your board’s bearings, rendering them unusable. You should also check your wheel tightness after every few hours of riding to make sure that everything is still secure and safe for you to use.
How Long Should Skateboard Wheels Spin For?
Skateboard wheels create friction with the ground and thus, they slow down as you ride. The faster you skate, the more quickly your wheels will wear out so it is important to think about how long your board needs to spin before buying new ones.
If you love skating at a high velocity, then we recommend giving your wheel time to spin at least a couple of times before you catch your board and hop on. If
you are an occasional skater, then one full rotation should be enough.
For those who love doing tricks and flips, we recommend giving the wheels at least three good spins before jumping on to ensure that they have time to reach their maximum speed. It will also save your board from any unnecessary wear and tear because of catching it too quickly after a jump.
For those who skate on a regular basis, then we recommend allowing your wheels to spin at least five times before you catch the board and ride it again. This will help prevent any excess wear and tear which can ruin even the most durable of boards after time if kept unchecked.
How To Avoid Over-Tightening Skateboard Wheels?
Many people think that over-tightening their skateboard wheels is the best way to get maximum grip. While this may be true in some cases, there are other factors you should consider before deciding on whether or not your wheel is too tight. If it’s too lose you can also run into some problems like losing control while riding. Knowing
when your wheel is too loose or too tight will help you avoid problems and enjoy your skateboarding experience.
how to loosen bearings on a skateboard?
Well, the first thing you’re going to want to do is to pick up a skate tool or an Allen key set. You can get one of these pretty cheap and they will come in handy for other things too – like tightening your trucks!
To loosen bearings on a skateboard, you’ll want to grab your Allen key and remove the kingpin nut. Once that is removed, slowly back out the bearing bolts with an Allen key until they come free from their holders. Be careful not to damage anything as you take them apart – we recommend having some paper towels handy to soak up any excess oil that spills out onto the pavement!
Once loose, you’ll want to use an old toothbrush and some rubbing alcohol (or soap and water) to clean them off. After cleaning wipe with a dry towel or cloth until they are completely dry before reassembling your bearings by following our tutorial on how to put bearings back together here.
Once your bearings are cleaned and reassembled, you can simply pop them right back into their holders and replace the kingpin nut to lock it all in place again!
How to loosen skateboard wheels without tools?
It’s pretty easy to tighten, but it can be difficult to loosen skateboard wheels. Without tools, here are two ways to loosen them:
1. Put some Vaseline or some sort of thick grease on the threads of the bolts. When the wheels are spinning, the grease will break down and loosen the wheels.
2. Get a lot of wood glue, thick superglue, epoxy, etc. Get it on the wheels, and let it dry. When they dry out, skate on them, they will come loose.
Conclusion
Following the steps outlined in this blog post will help you avoid over-tightening your skateboard wheels and potentially damaging them. Skateboarding is a fun activity, but it can be frustrating if you’re not sure how to prevent damage from occurring. The tips we’ve given should give you some insight into how to keep your board’s wheels working for as long as possible. If any of these recommendations don’t make sense or seem like they would apply to your situation, feel free to reach out and ask us questions! We’d love to hear about what gear has been most helpful for you so far with skating and we hope that our advice helps ensure that yours will last too. What other tricks have helped you get the right tight