Why Does My Skateboard Squeak?

If you’re a skateboarder, then you know the irritation of your board squeaking every time you try to do a trick. But what is the source of this noise, and more importantly, how can you stop it? We’ll take a look at the causes of skateboard squeaking and offer some solutions.

Why Does My Skateboard Squeak?

There are a few different reasons why your skateboard might be squeaking.

The Bushings: The bushings are the small, rubbery parts that attach the wheels to the axles. If they’re worn out, they can cause your wheels to rub against the axles, resulting in a squeak. You can usually tell if this is the problem by inspecting your bushings. If they’re cracked or otherwise damaged, it’s time to replace them.

Loose Bolts: If the bolts that hold your trucks (the metal parts that attach the wheels to the deck) are loose, they can also cause a squeak. This is because the trucks will be able to move around more, causing the wheels to rub against the sides of the deck. To fix this, simply tighten the bolts with a skate tool or a regular wrench.

Dirty Bearings: The bearings are the small metal balls that sit in between the wheels and the axles. They allow the wheels to rotate smoothly. If they’re dirty, however, they can cause your wheels to slow down and make a grinding noise. To clean them, you’ll need to remove the wheels and soak the bearings in mineral spirits overnight. Once they’re clean, dry them off and put them back in place.

Worn-Out Wheels: Finally, if your wheels are worn out, they can also make a squeaking noise. This is because the rubber is worn down, causing the wheels to rub against the deck and the bearings. If your wheels are starting to look flat or feel rough, it’s time to replace them.

How do I stop my skateboard from squeaking?

You know that annoying sound your board makes when it rubs against the pavement. It can get really frustrating when you’re trying to do tricks and the noise is constantly interrupting your flow. Well, we’ve got some tips for you on how to stop that pesky squeak!

First, check to see if your bearings are properly lubricated. If they’re not, then that’s probably the culprit. You can either use bearing lube or WD-40 to get the job done. Just make sure to clean off any dirt or grime first before applying either one.

If your bearings are fine, then it’s likely that your trucks are the problem. Again, you’ll want to lubricate them with either bearing lube or WD-40. Also, make sure that your kingpins are tightened properly. Loose trucks can cause a lot of noise and can also make your board less stable.

Another thing you can try is tightening your hardware. Loose bolts can also cause squeaking, so make sure to check all of the screws and nuts on your board.

If you’ve tried all of these things and your board is still squeaking, then it’s time to take it to a skate shop and have them take a look at it. There’s probably something else going on that you’re not aware of. Skate shops are full of experts who can help you figure out the problem and get your board running smoothly again.

Is it okay if your skateboard is squeaky?

If you’re a skateboarder, you know that there’s nothing quite like the feeling of cruising down the street on your board. But what if your skateboard is making a squeaky noise? Is that normal?

The short answer is yes, it is perfectly normal for a skateboard to make some noise as you ride it. However, if the noise is excessive or seems to be coming from a specific area, it could be indicative of a problem.

Skateboards are made up of many different parts, all of which can potentially make noise as you ride. The bearings, for example, may start to squeal if they’re dry or need to be replaced. The wheels can also make noise if they’re not properly inflated or if the bearings are damaged.

If you’re concerned about the noise your skateboard is making, the best thing to do is to take it to a professional for an inspection. They will be able to identify any potential problems and help you get your board back in top riding condition.

How to fix squeaky trucks on a skateboard?

If your skateboard trucks are squeaking, it can be annoying and even embarrassing. But don’t worry, there are some easy ways to fix this problem.

First, try tightening the kingpin nut. This is the large nut that holds the axle in place. If it’s loose, it can cause the trucks to squeak. Just use a wrench to tighten it until it’s snug.

If that doesn’t work, you may need to adjust the trucks themselves. To do this, loosen the screws that hold the truck in place. Then, turn the truck so that the kingpin is pointing inward (toward the center of the board). This will tighten up the trucks and may stop the squeaking.

If none of these solutions work, you may need to replace your trucks. This is usually a last resort, but it’s worth considering if nothing else seems to be working.

Ultimately, squeaky trucks shouldn’t stop you from enjoying your skateboarding. With a little patience and some trial and error, you should be able to fix the problem. And if all else fails, remember that you can always buy new trucks!

Why does my skateboard squeak when I stand on it?

Have you ever wondered why your skateboard squeaks when you stand on it? Well, there’s actually a scientific reason behind it.

When you stand on your skateboard, your weight compresses the deck and causes the wood to flex. This flexing of the wood produces a high-pitched sound that we know as a squeak.

The sound is caused by the vibration of the wood as it flexes under your weight. The higher the pitch of the squeak, the more flexible the deck is. So, if you’re hearing a really high-pitched squeak, it means your deck is quite flexible and may need to be replaced.


Skateboard squeaks are usually caused by metal-on-metal contacts, like when the skateboard trucks rub against the baseplate or the wheel nuts touch the axle. If this is happening to your board, you can try some of these tips to stop the noise: apply lubricant to the moving parts, tighten all screws and bolts, adjust wheel alignment, replace worn out bushings or bearings. And if that doesn’t work? You may just have to suck it up and ride a noisy board – at least until you save up for a new one!

Leave a Comment