How to Loosen Skateboard Wheels Without Tools?

There will be times when your skateboard wheel becomes so tight that you cannot loosen it no matter how hard you try. This can be a frustrating experience, especially if you are in the middle of nowhere and do not have any tools to help you. However, there are some ways to loosen skateboard wheels without using any tools. In this blog post, we will share with you three different methods on how to do this. So read on and find out how you can get your wheels loosened in no time at all!

If you’re a skateboarder, sooner or later you’ll need to learn how to loosen skateboard wheels without tools. It’s not difficult, but there are a few things you need to know before you start.

How to Loosen Skateboard Wheels Without Tools?

As a skateboarder, you’ll need to occasionally change your wheels. This is because they will eventually get to wear down from all the skating you do and need to be replaced. When this time comes, you’ll need to know how to loosen skateboard wheels without tools so that you can take them off and put new ones on.

Observation

The first step is to simply observe your skateboard wheels. There are two main types of skateboard trucks: those with Phillips head screws and those with Allen/hex bolts. Your wheels will be attached to the trucks via either of these types of screws/bolts.

If your skateboard has Phillips head screws, you’ll need to use a Phillips head screwdriver to loosen them. If your skateboard has Allen/hex bolts, you’ll need to use an Allen wrench or hex key to loosen them.

Step 2: Check the Spin

Once you’ve determined which type of screw/bolt your skateboard has, the next step is to check the spin. To do this, grab your skateboard and roll it forwards. As you’re rolling it, pay attention to how the wheels are spinning.

If the wheels are spinning smoothly, that’s a good sign. However, if the wheels are wobbling or spinning erratically, that’s a sign that they’re too tight. In this case, you’ll need to loosen them so that they spin more smoothly.

Step 3: Loosen the Wheels

Now that you know which type of screw/bolt your skateboard has and you’ve checked the spin, it’s time to actually start loosening the wheels.

If your skateboard has Phillips head screws, use a Phillips head screwdriver to loosen them. If your skateboard has Allen/hex bolts, use an Allen wrench or hex key to loosen them.

Start by loosening each screw/bolt a quarter of a turn at a time. Once all of the screws/bolts have been loosened a quarter of a turn, roll your skateboard forwards and check the spin again.

If the wheels are still wobbling or spinning erratically, loosen each screw/bolt another quarter of a turn and check the spin again. Repeat this process until the wheels are spinning smoothly.

And that’s it! You now know how to loosen skateboard wheels without tools. Just remember to always check the spin after loosening the screws/bolts, and keep adjusting until the wheels are spinning smoothly.

Tools

  • Wrench

Start by loosening the bolts that hold the wheels in place. You will need to use a wrench or a similar tool to do this. Once you have loosened the bolts, remove them entirely and set them aside.

  • Plier

The next step is to remove the nuts. You can do this by hand, but it may be easier to use a pair of pliers. If the nuts are stuck, you can try spraying them with a lubricant like WD-40.

  • By Your Hand

Once the nuts are removed, you should be able to remove the wheels by hand. If they are stuck, you can try gently tapping them with a hammer to loosen them.

REMEMBER: When you put the new wheels on, be sure to tighten the bolts and nuts securely so that they don’t come loose while you’re skating!

How Long Should the Wheels Spin After Flicking Them?

The answer to how long skateboard wheels should spin after being flicked really depends on the quality of the wheels. If you have good-quality wheels, they should be able to spin for a while. However, if your wheels are not of good quality, they might only spin for a few seconds.

It is also important to note that how long your wheels spin also depends on the terrain. If you are skating on a smooth surface, your wheels will spin for a longer period of time than if you are skating on a rough surface.

Finally, it is also worth mentioning that how long your wheels spin also depends on how hard you flick them. If you flick them hard, they will spin for a longer period of time than if you flick them softly.

All in all, the answer to how long skateboard wheels should spin after being flicked really depends on a number of factors, including the quality of the wheels, the terrain, and the force with which they are flicked.

If you want your wheels to spin for a long time, make sure to get good-quality wheels and flick them hard. Skate on smooth surfaces whenever possible, and you should be able to get your wheels spinning for a while.

How to Avoid Tightening Your skateboard Wheels Excessively?

One of the most important aspects of skateboarding is keeping your skateboard in good condition. This means that you need to regularly check your skateboard for any damage and make sure that all the parts are tightened properly. One of the parts of the skateboard that you need to pay special attention to is the wheels.

Tightening your skateboard wheels too much can actually damage your skateboard and make it less effective. When you tighten your skateboard wheels, you are essentially putting extra pressure on the bearings, which can damage them over time. Additionally, if you tighten your skateboard wheels too much, it will make your ride less smooth and comfortable.

The best way to avoid tightening your skateboard wheels excessively is to regularly check them and make sure that they are not too tight. You can do this by gently pressing down on the center of the wheel with your finger. If the wheel moves easily, then it is probably fine. However, if the wheel is difficult to move or feels overly tight, then you will need to loosen it slightly.

Another way to avoid tightening your skateboard wheels excessively is to invest in a good set of bearing tools. These tools will help you properly tighten or loosen the wheels on your skateboard without damaging the bearings.

Overall, it is important to be careful when tightening or loosening your skateboard wheels. If you are unsure about anything, it is always best to consult with a professional skateboard mechanic or shop. They will be able to help you properly maintain your skateboard and make sure that all of the parts are functioning properly.

Why Is It Important To Loosen The skateboard Wheels?

The skateboard wheels are one of the most important parts of the skateboard. They affect the speed, maneuverability, and overall performance of the skateboard. That’s why it’s important to loosen the skateboard wheels before riding.

There are a few reasons why loosening the skateboard wheels is important.

  • First, it allows the skateboard to roll faster. This is because the wheels are not as tight against the ground, so they can spin more freely.
  • Second, it makes the skateboard more maneuverable. This is because the wheels are not as tight against the ground, so they can turn more easily.
  • Finally, it makes the skateboard more stable. This is because the wheels are not as tight against the ground, so they can’t wobble as much.

Overall, loosening the skateboard wheels is important because it affects the speed, maneuverability, and stability of the skateboard. That’s why it’s important to loosen the skateboard wheels before riding.

Conclusion

So there you have it! You can loosen skateboard wheels without tools by using a variety of methods. Which one will work best for you depends on the wheel and how tight it is screwed on. Give them all a try and see which one works best for you. And be sure to keep your skateboard in good condition by regularly tightening and loosening the wheels!

Leave a Comment