As a skateboarder, you’re going to want to know how to stop on your board. This is an important skill to have, especially when you’re skating in a crowded area or around obstacles. There are a few different ways to stop on a skateboard, and each one has its own benefits and drawbacks. In this blog post, we’ll take a look at the ten most common ways to stop on a skateboard, and we’ll also give you some tips on how to choose the right method for you.
How to Stop on a Skateboard? Top 12 Ways
There are a few different ways to stop on a skateboard. Some skateboarders prefer one method over the others, while some use a combination of methods depending on the situation. The following are the ten most common ways to stop on a skateboard:
-
Foot braking
Foot braking is the most common way to stop on a skateboard. It’s also the easiest way to stop, which is why it’s often used by beginners. To foot brake, simply place your back foot on the tail of the board and apply pressure until you come to a stop. The main advantage of foot braking is that it’s easy to do and doesn’t require any special skills. However, it can be hard to control your speed when foot braking, and you may end up going faster than you wanted to.
-
Heel flipping
Heel flipping is a more advanced way to stop on a skateboard. To do this, you pop the tail of your board up in the air and then put your heel down on the ground. This will make the board flip over and come to a stop. Heel flipping is a great way to stop quickly, but it can be hard to control your speed and it’s easy to accidentally flip your board over if you’re not careful.
-
Carving
Carving is a method of stopping that’s similar to foot braking, but it’s done by turning your board from side to side. This is a great way to slow down and control your speed, but it can be hard on your wheels.
-
Slide Stop
Slide stop is a more advanced method of stopping that’s similar to carving. To do this, you turn your board sharply to one side and then skid to a stop. This is a great way to quickly stop, but it can be hard on your wheels and it’s easy to lose control if you’re not careful.
-
Power sliding
Power sliding is a method of stopping that’s similar to regular sliding. To do this, you turn your board sharply to one side and then skid to a stop. This is a great way to quickly stop, but it can be hard on your wheels and it’s easy to lose control if you’re not careful.
-
Regular Sliding
Regular sliding is when you slow down or stop by scrubbing your back foot against the ground. To do this, you need to be on your toes with your weight slightly over your back foot. As you start to slow down, apply pressure to your back foot to drag it against the ground. The friction will slow you down and eventually stop you. Regular sliding is a great way to slow down quickly without having to jump off your board. It’s also a good emergency brake if you suddenly need to stop. However, regular sliding can wear down your shoes and damage your deck if you do it too much.
-
Cross-Step Sliding
Cross-step sliding is similar to regular sliding, but instead of dragging your back foot, you drag your front foot. To do this, you need to be in an upright position with your weight over your front foot. As you start to slow down, apply pressure to your front foot to drag it against the ground. The friction will slow you down and eventually stop you. Cross-step sliding is a great way to slow down quickly without having to jump off your board. It’s also a good emergency brake if you suddenly need to stop. However, like regular sliding, cross-step sliding can wear down your shoes and damage your deck if you do it too much.
-
Power Sliding
Power sliding is a great way to stop if you’re skating in a crowded area or need to come to a stop quickly. To power slide, you simply push your back foot down on the tail of your board and let your front foot drift off the nose. This will cause your board to spin out and come to a stop. Power slides are also great for turning sharply around corners.
-
Heel Dragging
Heel dragging is when you use your heel to slow down or stop. To do this, you need to be in an upright position with your weight over your back foot. As you start to slow down, apply pressure to your heel to drag it against the ground. The friction will slow you down and eventually stop you. Heel dragging is a great way to slow down quickly without having to jump off your board. It’s also a good emergency brake if you suddenly need to stop. However, like regular and cross-step sliding, heel dragging can wear down your shoes and damage your deck if you do it too much.
-
Toe Dragging
Toe dragging is a braking method where you drag your toe along the ground to slow yourself down. This technique is often used by experienced skateboarders who can control their speed and direction well. Toe dragging is not recommended for beginners as it can be difficult to control and may result in scraped toes!
-
Hand Braking
Hand braking is a braking method where you use your hands to slow yourself down. This can be done by either grabbing the ground with your hand or by using a handbrake (a small device that attaches to your hand and allows you to brake). Hand braking is often used by experienced skateboarders who can control their speed and direction well. However, it is not recommended for beginners as it can be difficult to control and may result in scraped hands!
12. Jumping off the Board
Jumping off the board is probably the most common way to stop on a skateboard. To do this, simply jump off your board and let it roll to a stop. Jumping off the board is a quick and easy way to stop, but it’s not always the safest. If you’re going fast, you could hurt yourself when you jump off. And if you’re not paying attention, you could jump into traffic or collide with something else.
Each method has its own set of pros and cons, so it’s important to choose the one that’s right for you. If you’re new to skateboarding, it’s probably best to start with the first two methods and work your way up to the more advanced ones. And always be careful when jumping off your board – you don’t want to hurt yourself!
How To Stop On A Skateboard Going Downhill?
If you are going downhill on your skateboard, you will need to use a different technique to stop than if you were going uphill. To stop while going downhill, you will need to drag your back foot. This can be done by either scraping your foot along the ground or by using the brakes on your skateboard.
To scrape your foot along the ground, you will need to keep your foot close to the ground and use your heel to slow down. Start by dragging your back foot a little bit and then increase the amount of pressure you are putting on your foot as you go faster. You may need to practice this technique a few times before you get it down perfectly.
How to stop on a cruiser skateboard?
There are a few things to keep in mind when stopping on a cruiser skateboard.
First, you want to make sure that you’re positioned correctly on the board. You should be standing in the middle of the board, with your weight evenly distributed. If you’re leaning too far forward or back, it will be more difficult to stop.
Next, you need to choose the right foot to put your weight on. If you’re stopping with your right foot, you’ll want to put your weight on the back left of the board. And if you’re stopping with your left foot, you’ll want to put your weight on the back right of the board. This will help you keep your balance and stop more effectively.
Finally, when you’re ready to stop, you need to lean back and drag your foot on the ground. This will slow you down gradually, and eventually bring you to a stop. It’s important not to lean too far back, or you may end up losing your balance and falling off the board.
If you follow these tips, stopping on a cruiser skateboard should be no problem!
Conclusion
When stopping on a skateboard, be sure to use your body and the ground to help you slow down. Practice braking in different scenarios so you can stay safe when skating.