If you are a beginner skateboarder, then the chances are that you have experienced an occasional spill. When this happens, it is important to know how to revert the skateboard in order to avoid any further injury. In this blog post, we will teach you how to do just that! So, whether you are a beginner or an experienced skater, keep reading for some valuable tips.
It’s easy to get frustrated when your skateboard won’t stay put. You may have even considered giving up on the sport altogether. But before you do, it’s important to know that there is a way to fix this problem. With a little bit of patience and the right technique, you can easily learn how to revert your skateboard.
How to revert skateboard?
What You Will Need
- A level surface
- A skateboard
- A friend (optional)
1. Start by finding a level surface to practice on. This could be a driveway, sidewalk, or even a smooth section of pavement. Avoid areas with cracks or uneven surfaces, as this can make it more difficult to stay balanced on your board.
2. Once you’ve found a suitable spot, place your skateboard on the ground in front of you. If you are a beginner, it may be helpful to have a friend hold the back of the board while you get into position.
3. To get into the proper starting stance, place your left foot on the tail of the board and your right foot in the middle of the deck. You may need to adjust your feet slightly depending on the size of your skateboard.
4. Bend your knees and lean forward, placing your weight on your front foot. This is known as the “stance” position and it will help you maintain balance while you are skating.
5. Once you are in the stance position, slowly start to push off with your back foot. As you gain speed, transfer your weight to your front foot and begin to lift your back foot off the ground.
6. When you are comfortable with your speed and balance, place your back foot on the tail of the board and your front foot in the middle. This is known as the “revert” position.
7. To complete the revert, simply push off with your back foot and transfer your weight to your front foot. You should now be in the standing position once again.
8. Practice this move until you are comfortable with it. Once you have mastered the revert, you can move on to other skateboarding tricks.
Tips & Warnings
- It may take some time to master the revert, so be patient and don’t get discouraged if you fall a few times.
- Always wear protective gear when skating, including a helmet, elbow pads, and knee pads.
- Never skate in areas where there is traffic or pedestrians. Find a skate park or other designated skating area.
- Be sure to inspect your skateboard regularly for signs of wear and tear. Replace damaged parts as necessary.
How to revert skateboard?
The backside revert, also known as a fakie backside 180, is a move in which the skateboarder ollies backwards and then rotates their body 180 degrees so they land facing forward again. The backside revert can be done on either a street or ramp setup.
To do a backside revert, the skateboarder will start in their natural stance, which for most people is regular-footed. They will then roll backward and pop an ollie off of the ground. As they are in the air, they will rotate their body 180 degrees so their front faces the direction they started from. The skateboarder will then land on the tail of their board and ride away.
A frontside revert is a skateboarding trick in which the skater ollies into the air, then quickly spins the board around so that it lands backward. The frontside revert can be done on any type of terrain but is most commonly done on vert ramps or large half pipes.
To do a frontside revert, the skater starts by riding up to the lip of the ramp or half pipe. They then do an ollie, and while they are in the air, they spin the board around so that it is facing backwards when they land. The skater then rides away backward.
The front side revert is a relatively easy trick to learn and is a good one to start with if you are new to skateboarding. It is also a good trick to use as a building block for more difficult tricks, such as the frontside 540 or the front side 720.
Nose stall revert
The nose stall revert is a move in skateboarding where the skater ollies and stalls on the nose of the skateboard, then drop the tail down and rolls away backward. The move can be done on any surface, but it is most commonly done on vert ramps.
To do a nose stall revert, the skater approaches the ramp with speed and ollies onto the nose of the skateboard. The skater then uses his or her weight to keep the nose of the skateboard elevated while the tail is dropped down. Once the tail is dropped, the skater rolls backward away from the ramp.
The nose stall revert can be a difficult move to master, but it is a useful move to know how to do. It can be used as an emergency brake on a vert ramp, or it can be used to set up for other tricks. With practice, the nose stall revert can be mastered and added to your repertoire of skateboarding tricks.