Skateboard bearings are one of the most important parts of the skateboard. They help the wheels rotate and provide a smooth ride. However, they can also be one of the dirtiest parts of the skateboard. Over time, dirt and grime can build up on the bearings and cause them to become less effective. That’s why it’s important to clean them on a regular basis.
There are a few different ways that you can clean your bearings, but the most important thing is to make sure that they are completely dry before you put them back in your skateboard.
So keeping in mind your needs, we have mentioned below some methods that you can use to clean your skateboard bearings.
How to clean skateboard bearings? Step by Step Guide
You’ll need a few tools and materials to get started cleaning your skateboard bearings. These include:
- -Rubber gloves
- -Towel
- -Container
- -Water
- -Bearing cleaner (or alcohol)
- an old toothbrush can also be helpful in scrubbing the dirt out of the bearings.
Method 1: The Soak Method
This is the easiest way to clean your skateboard bearings, but it does take a little bit of time. You’ll need to soak the bearings in a cleaning solution for at least an hour, but you can leave them overnight if you want to be extra thorough.
To start, remove the bearings from your wheels and put them in a container. Next, fill the container with water and add a few drops of bearing cleaner or rubbing alcohol. Then, let the bearings soak for at least an hour.
After the bearings have soaked, use a toothbrush to scrub away any remaining dirt. Finally, rinse the bearings with clean water and let them dry completely before putting them back in your skateboard.
Method 2: The Cleaning Solution Method
If you don’t have time to wait for the bearings to soak, you can use a cleaning solution to clean them more quickly.
To start, remove the bearings from your wheels and put them in a container. Next, fill the container with water and add a few drops of bearing cleaner or rubbing alcohol. Then, use an old toothbrush to scrub away the dirt and grime.
After you’ve scrubbed the bearings clean, rinse them with water and let them dry completely before putting them back in your skateboard.
Method 3: The Vinegar Method
If you don’t have any bearing cleaner or alcohol on hand, you can use vinegar to clean your skateboard bearings.
To start, remove the bearings from your wheels and put them in a container. Next, fill the container with water and add a few drops of vinegar. Then, let the bearings soak for at least an hour.
After the bearings have soaked, use a toothbrush to scrub away any remaining dirt. Finally, rinse the bearings with clean water and let them dry completely before putting them back in your skateboard.
Whichever method you choose, it’s important to make sure that the bearings are completely dry before you put them back in your skateboard. If they’re even slightly damp, they can rust and damage your skateboard. So be sure to let them dry completely before using them again.
Steps you needs to follow to clean your skateboard bearings
1. remove the bearings from your wheels and put them in a container.
2. Fill the container with water and add a few drops of bearing cleaner or rubbing alcohol.
3. Let the bearings soak for at least an hour.
4. use a toothbrush to scrub away any remaining dirt.
5. Rinse the bearings with clean water and let them dry completely before putting them back in your skateboard.
How to clean skateboard bearings with household items?
There are many items in houses to clean skateboard bearings with. The most common household item to clean skateboard bearings with is vinegar. Many people have this around the house and it does a great job at cleaning off grease and dirt. All you need to do is put some vinegar on a paper towel and rub it around the bearing. You can also use an old toothbrush to really get in there and clean them off well. Then just rinse the bearings off with some water and dry them before putting them back in your skateboard.
Another common household item to clean skateboard bearings with is rubbing alcohol. This will also do a great job at getting the grease and dirt off of your bearings. You can put some rubbing alcohol on a paper towel and rub it around the bearing. You can also use an old toothbrush to really get in there and clean them off good. Then just rinse the bearings off with some water and dry them before putting them back on your skateboard.
One last common household item to clean skateboard bearings with is WD-40. This is a great choice because it will not only clean the bearings but it will also lubricate them. You can put some WD-40 on a paper towel and rub it around the bearing. You can also use an old toothbrush to really get in there and clean them off good. Then just rinse the bearings off with some water and dry them before putting them back on your skateboard.
How to clean skateboard bearings without lube?
If you need to clean your skateboard bearings without lube, you can use a household oil such as WD-40 or 3-in-1 oil. Apply the oil to a clean cloth and wipe the bearing. You can also use isopropyl alcohol (rubbing alcohol) to clean the bearing. Apply the alcohol to a clean cloth and wipe the bearing. Allow the bearing to dry completely before using it.
Can you wd40 skateboard bearings?
WD40 is a popular all-purpose lubricant that can be used for a variety of tasks around the home, including lubricating skateboard bearings. While WD40 will help to reduce friction and keep your bearings in good working order, it is not designed specifically for skateboard bearings and should not be used as a long-term solution. For best results, use a dedicated skateboard bearing lubricant and clean your bearings regularly to ensure they stay in good condition.
How to clean skateboard bearings without removing them?
Most people don’t know how to clean skateboard bearings without removing them. This is actually quite simple, and only requires a few items that you probably already have around the house. All you need is some WD-40, a toothbrush, and some paper towels.
First, remove the wheels from your skateboard. Next, take the paper towels and WD-40 and spray a generous amount onto the paper towels. WD-40 is a great degreaser and will help to break down any grime or dirt that may be on your bearings. Once you have sprayed the paper towels, use the toothbrush to scrub the bearings. Be sure to get into all of the nooks and crannies.
After you have scrubbed the bearings with the WD-40 and toothbrush, take some more paper towels and wipe off any excess WD-40. You don’t want to leave any WD-40 on the bearings, as this can actually attract more dirt and grime. Once you have wiped off the WD-40, re-assemble your skateboard and enjoy skating on clean bearings!
Conclusion
It is important to clean your skateboard bearings on a regular basis. Not only will this help them run smoother and faster, but it will also extend their lifespan. In this article, we have outlined the best way to clean your skateboard bearings using household items that you probably already have. So go ahead and give them a good cleaning.
FAQs
How often should I clean my bearings?
It is general practice to clean your bearings every few weeks. Many skateboarders will also clean their bearings after every session. A good rule of thumb is to clean your bearings when they start to feel sluggish.
How do I know if my bearings need to be cleaned?
There are a few telltale signs that your bearings need to be cleaned. If your skateboard starts to feel sluggish, or if the wheels start to make a grinding noise, then it is time to clean your bearings.
Is it worth cleaning skateboard bearings?
Absolutely! Cleaning your bearings will help to keep your skateboard running smoothly. In addition, it will prolong the life of your bearings.
Can you use soap and water to clean skateboard bearings?
Yes, you can use soap and water to clean your bearings. However, it is important to make sure that you rinse the bearings thoroughly afterwards. Otherwise, the soap might gum up the bearing and affect its performance.