How to Break a Skateboard?

Breaking a skateboard may seem like a difficult task, but it is actually quite easy to do. There are a few different ways that you can break a skateboard, and each method will produce different results.

The most common way to break a skateboard is by snapping it in half. This can be done by placing the board on the ground and stepping on it in the middle, or by gripping the board in both hands and breaking it over your knee.

How to Break a Skateboard?

1. Snap It Right in the Middle

The first way and most common way how to break a skateboard is by snapping it right in the middle. This can be done in two ways; either by placing the board on the ground and stepping on it in the middle or by gripping the board in both hands and breaking it over your knee. If you’re opting for the former, make sure to place the skateboard wheels down on the ground to avoid them from popping off. When breaking it over your knee, try to grip it as close to the middle as possible so that the pressure is more evenly distributed.

2. Break It at an Angle

If you want to snap your skateboard in half but don’t want to do it right down the middle, you can try breaking it at an angle. This is done by holding the board in both hands and applying pressure until it snaps. The angle that you break it at will determine how crooked the board will be when it snaps.

3. Make Some Fun Kickflips and Snap It

If you’re feeling adventurous, you can try breaking your skateboard by kick flipping it and snapping it in half. This is a pretty impressive feat and is sure to impress your friends. To do this, simply place the board on the ground, kickflip it into the air, and then snap it as it comes down.

4. Use a Skateboard Trick to Break It

There are a number of skateboard tricks that you can use to break your board. One of the most popular is the 50-50 grind, which is done by grinding the board on a rail or ledge. This will eventually weaken the board and cause it to snap.

5. Get a Friend to Help You Break It

If you’re having trouble breaking your skateboard on your own, you can always enlist the help of a friend. They can either hold the board while you snap it in half or they can help you break it at an angle. Either way, two people are always better than one when it comes to breaking a skateboard.

These are just a few of the ways how to break a skateboard. So, if you’ve been wanting to break your board for awhile but didn’t know how, now you do. Just remember to be careful and have fun!

Is a skateboard easy to break?

Skateboarding is a high-impact sport and, as such, skateboards can break easily if not properly maintained or used. However, with proper care and usage, a skateboard can last for many years.

There are several ways to break a skateboard. The most common way is by landing on the board wrong. This can happen if you land on your board too hard, or if you land crooked. Another way to break your board is by riding it into something solid, like a curb or a wall. And finally, skateboards can also break from simply being old and worn out.

If you do break your skateboard, don’t despair! There are plenty of ways to fix a broken board, and many parts are easily replaceable. With a little bit of effort, your broken skateboard can be as good as new in no time.

How much force does it take to snap a skateboard?

The amount of force required to snap a skateboard in half can vary depending on the type of wood the board is made of, how old the board is, and the width of the board. A newer board made of harder wood will require more force to break than an older board made of softer wood. A wider board will also require more force to break than a narrower board.

In general, it takes between 150 and 200 pounds of force to snap a skateboard in half. However, there have been reports of boards breaking with as little as 50 pounds of force. So, if you’re trying to break your board on purpose, it’s best to err on the side of caution and use more force than you think is necessary.

What causes a skateboard to break?

When it comes to skateboards, there are a number of factors that can cause them to break.

The most common reason is simply wear and tear from use. Over time, the components of the skateboard can become damaged or worn down, causing the board to break.

Another common reason for skateboard breakage is impact damage.

If the skateboard is dropped or hit hard, it can crack or break. This is especially true if the board hits something sharp or uneven.

Finally, poor quality materials and construction can also lead to a broken skateboard. If the deck is made from weak or brittle wood, it is more likely to snap. Similarly, if the trucks are not securely attached to the deck, they can come loose, causing the skateboard to break.

If you want to avoid breaking your skateboard, it is important to inspect it regularly for wear and tear. If you see any damage, make sure to repair or replace the damaged components before continuing to use the board. Additionally, be careful when using the skateboard and avoid dropping it or hitting it against hard objects. If you take good care of your skateboard, it should last for many years.


In the end, breaking a skateboard is not as difficult as it may seem. With a little bit of care and the right methods, you can easily break your board. Just remember to be careful and have fun! Thanks for reading!

Leave a Comment